FORM FACTOR.........: RACK 2U - RAID5 AS STD AND BBU
                      RX300 S6
                      
                      THIS SERVER WILL TAKE EITHER SAS OR
                      SATA DRIVES
                      
                      
PROCESSOR...........: Intel Xeon E5645 6C/12T 2.40 GHz 12 MB
                      
                      
CACHE...............: TLC: 12 MB
MEMORY STD/MAX......: 24GB rg (3X8GB) / 288 GB
MEMORY CONFIG.......: 18 slots (9 DIMMs per CPU, 3 channels
                      with 3 slots per channel
HARD DRIVE BAYS.....: 12 x 2.5-inch hot-plug SAS/SATA
INSTALLED/MAX.......: 
POWER SUPPLY........: 800 W
FANS................: 
CONTROLLERS.........: RAID 5 WITH 512MB AND BBU
NETWORK CARD........: 2 x Gbit/s Ethernet Intel® 82575EB
SLOTS...............: PCI-Express 2.0 x4 (mech. x8) 5 x low
                      profile
                      PCI-Express 2.0 x8 2 x low profile ,
                      both are notched x8 slot as well for
                      x16 cards
                      Slot Notes Two of four PCI-Express
                      Gen2 x4 slots can be used as x8, if
                      neighbour slot is empty.
                      One PCIe Gen2 x4 slot may be occupied
                      with a modular RAID controller if
                      configured.
PORTS...............: USB ports 10 x USB 2.0 (3x front, 4x
                      rear, 2x internal for backup devices
                      plus 1x USB stick)
                      Graphics (15-pin) 2 x VGA (thereof 1x
                      front optional)
                      Serial 1 (9-pin) 1 x serial RS-232-C,
                      usable for iRMC or system or shared
                      Serial 2 (9-pin) 1 x serial RS-232-C
                      LAN / Ethernet (RJ-45) 2 x Gbit/s
                      Ethernet
                      Service LAN (RJ45) 1 x dedicated
                      service LAN port for iRMC S2 (10/100